Shujing Liu
Shujing Liu, Female, born in May 1973 in Qitaihe, Heilongjiang Province, holds a Master's degree in Engineering and is a Senior Experimentalist as well as a Master's supervisor. She obtained her B. Eng. in Metal Materials and Heat Treatment from Jiamusi Institute of Technology in 1996, and her M. Eng. in Materials Engineering from Harbin Institute of Technology in 2008. From July 1996 to March 2005, she worked as a process engineer at Northeast Light Alloy Co., Ltd. Since April 2005, she has been a faculty member of the School of Mechanical Engineering at Beijing Institute of Petrochemical Technology.
She is primarily engaged in research on metal surface modification, metal corrosion and protection, and robotics technologies and applications. To date, she has led or participated in nearly ten research projects with total funding exceeding RMB 800,000 and has published more than twenty research papers.
I. Main Research Areas
1. Research on metal corrosion and protection;
2. Robotics technology and applications;
II. Research Projects
1.Industry-sponsored project: Process development for robotic welding workstations, Principal Investigator, 2018–2020.
2.Beijing Natural Science Foundation: Surface nanocrystallization of underwater friction stud welded joints and their erosion–corrosion wear mechanisms, Participant, 2019–2020.
3.Beijing Natural Science Foundation: Study on the biotribological properties of ultrasonic cold forging / micro-arc oxidation Ca-P coatings on magnesium surfaces, Participant, 2015–2017.
4.National Natural Science Foundation of China: Study on the biotribological properties of ultrasonic cold forging / micro-arc oxidation Ca-P coatings on magnesium surfaces, Participant, 2014–2016.
III. Representative Publications
1.Liu Shujing*, Zheng Xinhua, Gu Yanhong, Liu Shikai. Preparation of CdS/TiO? nanocomposites and their photo-generated cathodic protection performance on 304 stainless steel [J]. Materials Protection, 2019, 52(08): 39–44.
2.Liu Shujing*, Zheng Xinhua, Gu Yanhong, Liu Shikai. Preparation of multi-heterojunction CdS/PbS/TiO? and its photo-generated cathodic protection performance on 304 stainless steel [J]. Corrosion Science and Protection Technology, 2019, 31(04): 417–423.
3.Liu Shujing*, Liu Jinhua, Wu Le, Li Huanhuan, Xu Xiaolong. Design of deviation-correction control system for backpack magnetic-navigation AGV [J]. High Technology Letters, 2018, 28(07): 620–626.
4.Liu Shujing*, Dou Yantao, Wang Dianjun, Xu Menglong. Research on ball-throwing automatic robot and its control system [J]. Mechanical Engineer, 2006(07): 30–32.
5.Yi Chunzhi, Liu Shujing*, Xu Ben, Duan Liyan. Process study of 3004 aluminum alloy strip in H32 condition [J]. Light Alloy Fabrication Technology, 2004(12): 24–26, 39.
6.Liu Shujing*, Yi Chunzhi, Xu Ben. Process study of 8A06-H16 aluminum alloy strip for anti-theft bottle caps [J]. Light Alloy Fabrication Technology, 2003(10): 21–23.
7.Wang Dianjun, Ji Zhonghui, Liu Shujing*, Xiang Chen, Peng Wenxiang. Design of a six-degree-of-freedom modular robot control system [J]. Manufacturing Automation, 2015(12): 107–109.
8.Zhang Yiwan, Shi Chengjiang, Wang Dianjun, Liu Shujing*, Wu Chao, Xiang Chen. Error modeling and calibration experiment of a seven-degree-of-freedom robot [J]. New Technology and New Process, 2015(10): 72–76.
9.Wang Yanmeng, Shi Chengjiang, Wang Dianjun, Liu Shujing*, Li Qiang, Zhang Yiwan. Kinematic calibration of a six-degree-of-freedom modular robot based on laser tracker [J]. New Technology and New Process, 2015(10): 77–81.
10.Chen Lingling, Gu Yanhong, Dou Yantao, Zhang Jianjun, Liu Shujing*, Zhao Jie. In-vitro corrosion evaluation methods of biodegradable magnesium alloys [J]. Materials Protection, 2014(04): 51–56.
11.Zhang Liping, Wang Dianjun, Xu Xiaolong, Cao Yu, Liu Shujing*, Li Qiang. Design of a simulation system for a seven-degree-of-freedom robot based on MRDS [J]. New Technology and New Process, 2014(05): 48–51.
12.Gu Yanhong, Ning Chengyun, Zhao Jie, Liu Shujing*, Xiong Wenming. Corrosion inhibition mechanism of MAO coatings on AZ31 magnesium alloy in simulated body fluid [J]. Corrosion Science and Protection Technology, 2013(05): 365–371.
13.Chen L. L., Gu Y. H., Liu L., Liu S. J.*, Hou B. B., Liu Q., Ding H. Y. Effect of ultrasonic cold forging pretreatment on the corrosion resistance of MAO Ca/P coatings on AZ31B magnesium alloy [J]. Journal of Alloys and Compounds, 2015, 635: 278–288.
IV. Patents and Software Copyrights
1. Liu Shujing, Gao Shang, Wang Dianjun, Chen Ya, Zhao Jie, Zhang Peng, Wang Lele. Welding fixture for S-shaped rail support legs. Chinese Utility Model Patent, ZL201920298476.6, Authorized on April 17, 2020.
2. Liu Shujing, Wang Zhonghui, Zhao Huixin, Chen Ya, Zhao Jie, Wang Dianjun. Three-direction adjustable positioning device for L-shaped rail support welding fixture. Chinese Utility Model Patent, ZL201920298404.1, Authorized on April 21, 2020.
3. Chen Ya, Gao Shang (Student), Liu Shujing, Zhang Xuefeng (Student), Zhao Jie, Wang Dianjun. Magnetic quick-release positioning device for L-shaped rail support welding fixture. Chinese Utility Model Patent, ZL201920298478.5, Authorized on April 17, 2020.
V. Admissions Information
I primarily recruit students for the Professional Master's Degree Program in Mechanical Engineering (0855). Students majoring in Mechanical Engineering, Mechatronics, or related fields who are diligent, innovative, possess strong computer application skills, and have good English proficiency are sincerely welcome to join the research group.